Home > Arrow Components > Deep Impact Front Of Center Outsert System F.O.C.O.S
Deep Impact Front Of Center Outsert System F.O.C.O.S Deep Impact Front Of Center Outsert System F.O.C.O.S Deep Impact Front Of Center Outsert System F.O.C.O.S Deep Impact Front Of Center Outsert System F.O.C.O.S
Reviews
SKU: Deep-IMP-FOCOS
Black Eagle Arrows

Deep Impact Front Of Center Outsert System F.O.C.O.S

$48.99 - $53.99
Front Of Center Outsert System (Patent#US10203185)

QTY IS 1 DOZEN:
Introducing the Deep Impact Front Of Center Outsert System F.O.C.O.S by Black Eagle, the perfect addition to enhance your archery game. This innovative product is designed to maximize accuracy and performance. Crafted with precision, it offers exceptional features such as outsert sizes available in Deep Impact 300, 350, 400, and 500, catering to various arrow needs. Choose between stainless steel and 7075 T6 aluminum metal types for durability and strength. With its superior quality and unique selling points, the Deep Impact Front Of Center Outsert System F.O.C.O.S is a must-have component for any serious archer..

The F.O.C.O.S is made of 3 parts. One is the black anodized 7075 T6 aluminum alloy outsert or Stainless Steel Option. Two is a Stainless steel Retention post In The Aluminum Outserts Model and Aluminum in the Stainless Steel Outsert Model that also acts as a footer inside the shaft. The third part is the 3/32 allen head retention screw that allows for the Outserts to either be screwed or screwed and glued.(Not Tattooed) This system has been tested to over 550 Pounds per square inch of pull and they stay on! If you are looking for maximum penetration, Maximum F.O.C and shot after shot performance then the deadly combination of the Deep Impact, Instinct or X-Impact shafts then the F.O.C.O.S are sure to be a hit!
 
INCLUDES:
12 FOCOS OUTSERTS
12 FOCOS POSTS
12 FOCOS Retention Screws

Insertion Depth of Arrow in Outsert is .610 almost 5/8"
Outsert adds Approximately 1.090" to end of the Arrow

 
The Deep Impact & X-Impact Outsert Weights are a Follows:

ALUMINUM OUTSERTS TOTAL WEIGHT
ALL SPINES WEIGH 80 Grains

STAINLESS STEEL OUTSERTS TOTAL WEIGHT
ALL SPINES WEIGH 100 Grains
        To install the F.O.C.O.S System

 

      1. Select the right outsert for the right shaft.
      2. Glue in Stainless steel retention Post
      3. Dry fitting is recommended on all components. Slide Outserts over shaft and spin test (if you prefer)
      4. If Outserts does not fit that is OK. Get some 100 Grit sand paper and lightly sand the shaft in a circular motion until the outsert fits fairly snug on shaft. Start slowly so you don't remove to much off the arrow.
      5. You should have approximately 3/4 of an inch insertion on Aluminum Outserts
      6. Wipe dust off of the shaft with Clean paper towel. (No Cleaners are recommended)
      7. Again, Spin test to ensure concentricity.
      8. Use a Silver or Black Sharpie and mark the Shaft and the Outsert for perfect alignment
      9. Slide outsert over shaft and use the 3/32 Head retention Screw and Lock the Outsert in place!
      10. If using glue See steps 11-15 .
      11. We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
      12. Apply a even amount of glue around the shaft to ensure you get enough glue in them to hold.
      13. Slide Outsert On shaft rotating to make sure Glue/Epoxy is evenly dispersed
      14. Use the 3/32 Head retention Screw and Lock the Outsert in place!
      15. Once The outsert is glued on Screw is installed stand the arrow on the nock end to dry.
Full Description
Qty
  • Description
    Front Of Center Outsert System (Patent#US10203185)

    QTY IS 1 DOZEN:
    Introducing the Deep Impact Front Of Center Outsert System F.O.C.O.S by Black Eagle, the perfect addition to enhance your archery game. This innovative product is designed to maximize accuracy and performance. Crafted with precision, it offers exceptional features such as outsert sizes available in Deep Impact 300, 350, 400, and 500, catering to various arrow needs. Choose between stainless steel and 7075 T6 aluminum metal types for durability and strength. With its superior quality and unique selling points, the Deep Impact Front Of Center Outsert System F.O.C.O.S is a must-have component for any serious archer..

    The F.O.C.O.S is made of 3 parts. One is the black anodized 7075 T6 aluminum alloy outsert or Stainless Steel Option. Two is a Stainless steel Retention post In The Aluminum Outserts Model and Aluminum in the Stainless Steel Outsert Model that also acts as a footer inside the shaft. The third part is the 3/32 allen head retention screw that allows for the Outserts to either be screwed or screwed and glued.(Not Tattooed) This system has been tested to over 550 Pounds per square inch of pull and they stay on! If you are looking for maximum penetration, Maximum F.O.C and shot after shot performance then the deadly combination of the Deep Impact, Instinct or X-Impact shafts then the F.O.C.O.S are sure to be a hit!
     
    INCLUDES:
    12 FOCOS OUTSERTS
    12 FOCOS POSTS
    12 FOCOS Retention Screws

    Insertion Depth of Arrow in Outsert is .610 almost 5/8"
    Outsert adds Approximately 1.090" to end of the Arrow

     
    The Deep Impact & X-Impact Outsert Weights are a Follows:

    ALUMINUM OUTSERTS TOTAL WEIGHT
    ALL SPINES WEIGH 80 Grains

    STAINLESS STEEL OUTSERTS TOTAL WEIGHT
    ALL SPINES WEIGH 100 Grains
          To install the F.O.C.O.S System

     

        1. Select the right outsert for the right shaft.
        2. Glue in Stainless steel retention Post
        3. Dry fitting is recommended on all components. Slide Outserts over shaft and spin test (if you prefer)
        4. If Outserts does not fit that is OK. Get some 100 Grit sand paper and lightly sand the shaft in a circular motion until the outsert fits fairly snug on shaft. Start slowly so you don't remove to much off the arrow.
        5. You should have approximately 3/4 of an inch insertion on Aluminum Outserts
        6. Wipe dust off of the shaft with Clean paper towel. (No Cleaners are recommended)
        7. Again, Spin test to ensure concentricity.
        8. Use a Silver or Black Sharpie and mark the Shaft and the Outsert for perfect alignment
        9. Slide outsert over shaft and use the 3/32 Head retention Screw and Lock the Outsert in place!
        10. If using glue See steps 11-15 .
        11. We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
        12. Apply a even amount of glue around the shaft to ensure you get enough glue in them to hold.
        13. Slide Outsert On shaft rotating to make sure Glue/Epoxy is evenly dispersed
        14. Use the 3/32 Head retention Screw and Lock the Outsert in place!
        15. Once The outsert is glued on Screw is installed stand the arrow on the nock end to dry.
  • Reviews

    Reviews

    Matt Petrella

    Brilliant

    The idea behind the F.O.C.O.S is brilliant. Easy to build, easy to adjust the weight. I really like the durability that it adds to the time of impact.
    Andrew S.

    Focos

    Great addition to Deep Impact shafts
    Kyle Hosler

    Awesome Product

    Love these outserts. These compliment my shooting arrows perfectly and are super quality. Love everything that Black Eagle makes!!
    Phil

    F.O.C.O.S System

    I absolutely love the system. I have used them on multiple arrow builds. What I like most about them is being able to customize the weights and also being able to quickly and easily align my broadhead with my fletch with the simple loosening of a screw. Much better system than the glue on outskirts.
    Jeff Wunder

    Nice system

    Easy to install and I’m anxious to make my first harvest to see it work in real time. Great penetration on the target
    Cody Pierce

    Front Of Center Outsert System F.O.C.O.S

    As expected love it.
    anonymous

    FOCUS

    Very easy to install. Looking forward to see how they perform with broadheads.
    Daren Galloway

    FOCUS

    Great fit and the usual great tolerances
    mike koker

    F.O.C.O.S system

    This is the type of system that I wished I had when I was shooting victory arrows several years ago. Great product
    Alex Chumney

    Customer review

    Placed my order Thanksgiving week and got it the Saturday after Thanksgiving. Couldn’t believe how fast it happened.
    Amador Corona

    Nice system

    I like that you have the ability to use an insert with these that allows the outsert to be screwed onto/into it. This allows you to change the outsert if it has been damaged or from stainless to aluminum. Only complaint is the stainless set doesn’t come with the stainless insert.
    Bisanti Stefano

    Awesome: the FOCOS

    Love the quality and finish on the outserts and the inserts are 0 tolerance when fitting the shaft! Product looks super durable. Can’t wait to to shoot some new sticks!
    Art Minton

    Focos outsert system

    Love it! All of the parts were close tolerance thus fit together as if glued. After about 40 shots at 20 yards for zero, the outsert I decided not to glue on were still fastened tightly and all spin tested perfectly.
    Delorme Benoit

    nice top quality product

    Review body is empty
    Richard Gardner

    Customer review

    Review body is empty
    Robert Valentine

    F. O. C. O. S outserts

    These outsert are great. My lighted nocks were just enough to throw my arrow flight off. I switched to the 100gr. F. O. C. O. S and cured the issues. I highly recommend them.
    Scott Shields

    Good system

    Totally love how easy it is to customize your front end weight plus the easy ability of lining vanes with broadheads
    Brian Clark

    Customer review

    Review body is empty
    Michael Johnson

    Customer review

    Review body is empty
  • Details

    Details

    Current Stock:
    SKU: Deep-IMP-FOCOS

Related Products