Home > Arrows > Hunting Arrows > Renegade >

Renegade Shafts
Renegade Shafts 100% Carbon Arrows


 
Price $99.99

: Usually Ships in 24 to 48 Hours


Renegade Shafts*:
  

Spine*:
  

Qty:
Description
 
DURABLE LONG RANGE HUNTING SHAFTS
17 SERIES | SMALL DIAMETER

The Renegade was designed specially for hunters that want a supremely accurate small diameter carbon arrow that is tough as nails - at a great price. This shaft was designed to eliminate cross-wind drift. It’s perfect for those long range shots. The flight characteristics of this extremely durable shaft ensures maximum power down-range.


FEATURES
.005”
Straightness or Straighter
± 2
Grain Weight Tolerance
32.5"
Shaft Length

FLETCHED ARROWS INCLUDE:
  • Black Eagle Arrows "R" Nock 10 -Orange- Grains
  • Stainless Steel Bone Crushing Half-Outs - 56 Grains
  • Required: Points, Vanes
Don't forget extra components



To install the Half-Out.
  1. Square the end of the arrow shaft
  2. Dry fitting is recommended on all components. Slide half-out in shaft and spin test (if you prefer)
  3. If a slight wobble is noticed, DON'T PANIC! Rotate the half-out with field point installed until the spin is true.
  4. Again, Rotate Half-Out until it spins perfect.
  5. Use a Silver or Black Sharpie and mark the Shaft and the Half-Out for perfect alignment once glue is applied.
  6. We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
  7. Apply a even amount of glue around the shaft of the Half-Out to ensure the glue channels get enough glue in them to hold.
  8. Once the glued half-out is finished stand the arrow on the point to dry.
Marked for a perfect Spin Step#5
Specifications

Not sure what size is right for you. Check out our sizing chart.

Spine Inner Diameter Outer Diameter GPI
250 .204 .280 10.8
300 .204 .275 10
350 .204 .267 8.7
400 .204 .263 8

Hot Melt is NOT recommended for use with Black Eagle Arrow shafts.



Black Eagle Arrows Superior Technology
COREY JACOBSON
FOUNDER OF EXTREME ELK MAGAZINE / 7 TIME WORLD CHAMPION ELK CALLER
HARVEST /10 Point OREGON MONSTER ELK
Products are protected by United States Patent Nos. 7,004,859;7,720,618;7,374,504 and 7,608,001. Manufactured under license.

Components
2" Black Eagle Arrows Signature Blazer® Vane Black Eagle High Quality Fletching Adhesive Screw-In Field Point 5/16 Black Eagle Arrows R-Nock
Our Price: $8.99

Add
Our Price: $9.99

Add
Our Price: $9.99

Add
Price $9.99

Add
Black Eagle Arrows Signature Vanes Black Eagle Arrows fletching adhesive Screw-In Field Point 5/16 Black Eagle Arrows R Nock
Rampage-Renegade Break Away Weight Glue-In Target Point Rampage-Renegade Pin Bushing Rampage-Renegade Series Stainless Steel Bone Crushing Half-out Rampage-Renegade Platinum Bone Crushing Half-out
Our Price: $24.99

Add
Our Price: $14.99

Add
Our Price: $20.99

Add
Our Price: $44.99

Add
Rampage, renegade breakoff point Rampage, Renegade  Pin Bushing Rampage, renegade Stainless stee Bone Crushing Half out Rampage, renegade Platinum 17/4 Staninless Bone Crushing Half out
Screw-In Bullet Point 5/16 Pin Nock Rampage 150 Spine Platinum Bone Crushing Half-out
Our Price: $9.99

Add
Our Price: $11.99

Add
Our Price: $44.99

Add
Bullet Points 5/16 by Black Eagle Arrows Bohning Pin Nock rampage 150 Platinum Bone Crushing Half out